Another request from one of my readers, this time concerning weep holes. As you may know I answer every question I’m asked here on my site when I sober up get home from work. I have tried to explain in the comments section several times where to create weep holes in a tub or shower (acrylic base) tile installation and now realize it’s a difficult thing to do with words.
So when Kurt asked me to clarify exactly where they go a stroke of genius hit me! (Yeah, I’m slow sometimes) I have pictures. Well, not exactly pictures of the weep holes themselves, but I can at least let you know where they are.
When you have a tub which does not have specific spaces for a weep hole you need to ‘create’ them in your caulk line. Let me back up here a second and explain what weep holes are and why you need them.
A weep hole is basically an open space which allows moisture that makes its way behind the tile a space from which to dissipate. This is the spot that moisture can run out. When moisture gets behind your tile it will always end up at the bottom of your wall (tile installation). When it gets there it needs some place to go – to get out from behind the tile and into the tub or shower basin. That’s what the weep hole is.
Some tubs, and most acrylic shower basins, have these built into them. There is a spot about 3/4″ long that dips down from the plane of the edge and back up. It’s a dip in the edge of the tub or shower basin. When equipped with these built-in weep holes – DO NOT FILL THEM WITH CAULK! Everyone does that – they are there for a reason and no one seems to know what it is. They are weep holes. If you caulk them in it defeats the purpose of them – that will seal in the moisture.
If the moisture is sealed in behind the tile it has no place to dissipate and will simply sit there. Beyond that, the level of that moisture will continue to build with every use. The moisture cannot dissipate at the same rate that is gets back there. That’s gonna lead to a problem. You need weep holes to eliminate the moisture.
When you caulk or silicone the change of plane between the tile and tub you should leave an open space – a space without caulk – in each side wall about an inch out from the back wall. If you click on that little bitty picture to the right you will see two pretty pink lines on it – that’s where those spots are.
Each of these spots are about an inch long (this doesn’t need to be exact) and contain no grout, caulk or silicone – they are simply open space. These are your weep holes.
These spaces will allow moisture to dissipate. These do not need to be the lowest spots on the tub. In other words, if your tub is not entirely level and those spots are not the lowest, it doesn’t matter. The water will end up there and run out – it is the only space to release the pressure the water will build up. It’s a whole physics thing and I haven’t had enough beer Pepsi to properly explain it – but that’s what happens. And yes, you can put them wherever you want, that’s simply where I put them.
When you have an acrylic or fiberglass shower basin without built-in weep holes the same technique applies. Depending on how your tile and shower door lay out you may choose to put the weep holes toward the front of the basin, entirely up to you.
If you click the photo of the shower to the right, and ignore the fuzzy toilet seat cover, you will see the two pretty pink lines in the back as well as pretty blue lines toward the front. That’s where I put them when I don’t put them in the back. They sometimes look better toward the front if there is a shower door there – the frame will make the weep holes less noticeable.
That’s it – longer than I expected but much easier than trying to explain with just words. If you have a question or just need something clarified do not hesitate to let me know! My blog is here to help you and the fact that I do this stuff every day will, at times, blind me to certain basic things. I do a lot of this stuff without even thinking about it and don’t realize that what is basic to me is not basic to you. If you want a post about a specific subject just let me know in the comment section of any of my posts or shoot me an email at Roger@FloorElf.com. Or, you know, send up smoke signals from your dogs back – he may have just burst into flames again.
There you go Kurt, tell mom you win this one and she owes you a six-pack.
UPDATE: I finally got off my ass and actually took some photos of weep holes in the silicone bead around a tub. These are what I’ve described above and can be used in either a tub or a shower base. There is one on each side of the tub towards the front.