When picking out your tile how do you make sure that the surface is durable enough to last in that particular area? Well, being a hands-on kinda guy I use to walk into the tile shop with a belt sander and test it. If the sandpaper wore out before the surface of the tile we found a winner! This tended to piss people off, though. Then I found out there is, as most things I do, an easier way.

For everyone else in the world this is determined by using what is called the PEI, or Porcelain Enamel Institute, rating of your tile. The PEI rating is between I and V with a V being the most durable. Those are Roman numerals, not the 19 letters between I and V. :D  I’ll just call them 1 to 5 – you know, since I’m not from, nor am I in, Rome.

This scale is used by most tile manufacturers to determine the surface wear durability and should be printed on the box of tile somewhere. If it is not you can always contact your tile manufacturer for the information.

General guidelines for proper installation areas are as follows:

  • Group I: Tile suitable only for residential or commercial walls – stuff you don’t walk on unless you’re Spiderman. Not suitable or recommended for foot traffic (unless you are, indeed, Spiderman).
  • Group II: Tile suitable for general light residential traffic. Not recommended for kitchens, entryways, heavily used bathroom floors or any other area subject to continuous use foot traffic.
  • Group III: Tile suitable for all residential and light use commercial foot traffic areas. You can pretty much put this everywhere in your house except your garage floor.
  • Group IV: Tile suited to all residential, medium commercial, and light industrial applications such as restaurants, hotels, and hospital lobbies.
  • Group V: Tile suitable for all residential, heavy commercial, and industrial applications such as airports, malls, subways, and the Space Shuttle.
  • [click to continue…]