I get a LOT of questions from my readers about basic shower construction. I understand that my readers don’t consider this stuff basic and there’s no problem with that. The problem is that I end up answering the same questions over and over and over… So, to save what very little is left of my sanity (which is a number roughly equivalent to absolute zero) I will cover some basic things here so I can simply reply ‘read this’.
If you’ve been channeled to this page by one of my smart-ass comments please take no offense to it, I’m here to help. Please understand that I currently have over 12,000 comments (questions) on this site (seriously) which I’ve answered – every one of them. I’m just trying to make your life (mine) easier. I will continue to answer every question I’m asked, I’m just super cool like that. If, after reading through this, you still have questions feel free to ask them in the comments below.
You can also download my shower waterproofing manual which should answer a lot of questions and cover basic techniques and methods you may be confused about. Go ahead, it’s free. So without further ado (doesn’t even look like a word, does it?) let’s get on with it. (For all my readers who feel the need to correct me: I KNOW it’s actually ‘adieu’ – I was being facetious. Thanks. )
[click to continue…]
One of my readers has handcuffed me to the radiator in her basement and won’t let me go until I describe how to build a corner shelf in her shower. And she keeps giving me dirty looks. I guess I’ll do it, then.
See those little shelves right there? (You can click on it for a larger version) They’re made from the same tile that is on the walls – it matches that way. If you have a two-walled shower with only exterior walls it’s nearly impossible (or at least not very probable) to build a niche – frozen shampoo sucks. It’s also difficult to build niches if you have two exterior walls and one wall with all your plumbing – not much room there, either. So a corner shelf, or shelves, may be the way to go.
And they’re easy to make. And I don’t have pictures of the process.
The only difference in the way you install the tile on your walls is that you need to only install up to the row beneath where you are placing the shelf. You need to install tile up to that point on both walls that meet the corner. The bottom portion of the shelf is going to sit on top of those two rows directly against the walls in the corner. The next row of tile is then cut around and on top of the base shelf piece to lock it into the wall.
First decide how many shelves you need. Cut a full tile diagonally, corner-to-corner, in both directions. This will leave you with four identically-sized triangles of tile – these will be your shelf base, the part that’s locked into the wall.
[click to continue…]
When you tear out and rebuild your shower walls you are left with a transition between the old, existing drywall and the new stuff – cement backerboard or drywall (if you’re using kerdi). Whaddya do with it? And how do you do it? And why am I the one asking questions – that seems backwards.
If at all possible, when you remove the old stuff you want to cut a straight line down the drywall to make for a clean transition. If it isn’t straight or was simply torn out without any regards to actually rebuilding it, then find a spot where you can cut a straight line from top to bottom. You want to have a level line for your transition.
So before you begin you want something similar to that horrible graphic right there I just created with a bottle of scotch and my toes. The left side is looking into the wall cavity with one stud, that big brown looking thing? Yeah, it’s supposed to be a wall stud. You are not allowed to give me crap about my lack of Photoshop skills!
[click to continue…]
One of the most asked questions by do-it-yourselfer’s is whether they should use caulk or grout in the corners. Industry standards state that a flexible material be used at all changes of plane. But! – if you ask a hundred different professionals you will more than likely receive fifty of each answer. While there are pros and cons of each, I am in the camp that uses caulk. That being the case, I will discuss using grout first. I’m backwards like that.
Using Grout at Changes of Plane
While the phrase “changes of plane” may sound a bit uppity or technical – it’s not. It simply describes the corner or edge of any surface that changes direction such as a corner, a wall to a floor, or a wall to the tub edge. Many professionals simply grout that corner as they do any other space between the tiles. There are a couple of things that must be taken into consideration before choosing this method.
- Your walls and the framing of your shower must be absolutely rock solid. I do mean absolutely. Grout is a cement-based product and as such is not meant to flex. If your wall moves your grout will eventually crack – it’s that simple.
- The space between the tiles at the change of plane must be large enough (for sanded grout) or small enough (for non-sanded grout) to be able to support the grout. That simply means that if you are using sanded grout you cannot butt the tiles against each other at the corner and expect to be able to force grout into it. It will not stay if the grout has no grout line to hold onto – if it is simply attempting to grab onto the face of the tiles at a 90 degree angle. There must be a grout line at the changes of plane.
- You must decide you are going to use grout at the changes of plane before you install the tile. You can then make sure to leave a line for the grout as well as adding additional support for any spots that may move even the tiniest bit (which it should not do anyway).
If you have taken the above points into consideration and still decide to use grout in the corners – go ahead. The big advantages of using grout here is that it will match all the grout lines and it will never have to be replaced. So although extra care must be taken to properly use grout at your plane changes, the advantages for some people are worth the extra time. [click to continue…]