Spectralock Pro PremiumAnyone who reads my blog (and lets be honest – who doesn’t?) knows that I am a diehard SpectraLOCK junkie. For those who don’t know what that is, SpectraLOCK is an epoxy grout made by Laticrete. It is stain-proof, pet-proof, and bullet-proof! (Don’t try that, it’ll really piss off the wife…) If you don’t know any of that – you need to read my blog more! :guedo: So just like everything I love – it changed.

Laticrete has recently come out with SpectraLOCK Pro Premium grout. A little birdie told me that this will replace the SpectraLOCK pro grout in the near future. Given that, I need to figure out how to use it – because it works differently than the stuff I’m used to. The difference in the workability may very well be due to the temperature, humidity, hangover flu bug, or any number of factors on the particular days I was working with it.

But it just doesn’t feel ‘normal’ to me – you know? It seems like it tightens up (gets stiff) and starts to roll out of the grout joints more quickly than the other stuff did. So, as with any installation product, if it begins to cure faster than you can use it you should just mix up smaller batches. And being the awesome DIY crowd you are – it’s probably a good idea for you to know how to do that anyway. So this is the best way I’ve found to do it.

[click to continue…]

Building a traditionally waterproofed shower for tileI’ve finally gone and done something worthwhile! Well, that’s a matter of opinion, I guess, namely mine. I have written complete manuals on properly building and waterproofing your shower utilizing the different waterproofing methods.

Each manual describes a specific method so you don’t get bogged down with a bunch of information you don’t need for your chosen project. Not sure which method you want? Not sure which methods are available? Didn’t know there were different methods? Start with the free manual here: Shower Waterproofing Manual. That will help you decide which one you want to use based on time, skill and cost.

Once you figure that out you can get the manual that is specific to your particular project. Although these are all mostly completed it’s a whole process to get them ready for you guys. It’s difficult to describe but it includes half a watermelon, platypus eyelashes and a full moon – weird, right? Let’s just say I’ve been writing the damn things for close to two years – it’s not a short process.

Anyway, I do have two of them all finished up, uploaded and ready for you to devour!

I have the complete shower manual utilizing the traditional waterproofing method for walls and floors. This will walk you through the entire process for complete shower floor and wall building and waterproofing. If you are going to have a tiled shower floor and walls and need to construct the entire thing – this is the one you need. You can get it here: Complete traditional shower waterproofing method (Price goes up next week!)

And I have the manual using the traditional method for just your shower walls. If you already have a tub or pre-formed base (like acrylic or Swanstone) this is the one you need. You can get it here: Traditional waterproofing for your shower walls

You can always just click the yellow highlighted ‘Library’ tab at the top to see what’s currently available. If you have any questions just feel free to ask them in any of the comment sections on the site. I always answer them – I’m just super cool like that. 8) I will add the new manuals to the library section as I finish them up.